Accelerometer ICP® Model 352C65
Platinum Stock Products; High sensitivity, miniature (2 gm),
ceramic shear ICP® accel., 100 mV/g, 0.5 to 10k Hz, 5-44 side conn.
- Sensitivity: (±10%) 100 mV/g (10.2 mV/(m/s²))
- Measurement Range: ±50 g pk (±491 m/s² pk)
- Broadband Resolution: 0.00016 g rms (0.0015 m/s² rms)
- Frequency Range: (±5%) 0.5 to 10000 Hz
- Sensing Element: Ceramic
- Weight: 2.0 gm
|
|
ENG |
SI |
|
Performance |
|
|
|
Sensitivity (±10 %) |
100 mV/g |
10.2 mV/(m/s²) |
|
Measurement Range |
±50 g pk |
±491 m/s² pk |
|
Frequency Range (±5 %) |
0.5 to 10000 Hz |
0.5 to 10000 Hz |
|
Frequency Range (±10 %) |
0.3 to 12000 Hz |
0.3 to 12000 Hz |
|
Frequency Range (±3 dB) |
|
|
|
Resonant Frequency |
≥35 kHz |
≥35 kHz |
|
Phase Response (±5 °) (at 70°F [21°C]) |
2 to 6000 Hz |
2 to 6000 Hz |
|
Broadband Resolution (1) [2] |
0.00016 g rms |
|
|
Non-Linearity [1] |
≤1 % |
≤1 % |
|
Transverse Sensitivity [3] |
≤5 % |
≤5 % |
|
Environmental |
|
|
|
Overload Limit (Shock) |
±5000 g pk |
±49050 m/s² pk |
|
Temperature Range (Operating) [4] |
-65 to +200 °F |
-54 to +93 °C |
|
Temperature Response [2] |
See Graph %/°F |
See Graph %/°F |
|
Base Strain Sensitivity [2] |
≤0.005 g/µε |
≤0.05 (м/с²)/µε |
|
Electrical |
|
|
|
Excitation Voltage |
18 to 30 VDC |
20 to 30 VDC |
|
Constant Current Excitation |
2 to 20 mA |
2 to 20 mA |
|
Output Impedance |
≤300 Ohm |
≤100 Ohm |
|
Output Bias Voltage |
8 to 12 VDC |
8 to 12 VDC |
|
Discharge Time Constant |
0.8 to 2.4 sec |
0.5 to 2.0 sec |
|
Spectral Noise (10 Hz) [2] |
16 µg/√Hz |
157 (µm/sec2)/√Hz |
|
Spectral Noise (100 Hz) [2] |
5 µg/√Hz |
49 (µm/sec2)/√Hz |
|
Spectral Noise (1 kHz) [2] |
1.5 µg/√Hz |
14.7 (µm/sec2)/√Hz |
|
Physical |
|
|
|
Weight [2] |
|
2.0 gm |
|
Sensing Element |
Ceramic |
Ceramic |
|
Sensing Geometry |
Shear |
Shear |
|
Housing Material |
Titanium |
Titanium |
|
Sealing |
Welded Hermetic |
Welded Hermetic |
|
Electrical Connector |
5-44 Coaxial |
5-44 Coaxial |
|
Electrical Connection Position |
Side |
Side |
|
Mounting Thread |
5-40 Male |
5-40 Male |
|
Mounting Torque |
8 to 12 in-lb |
90 to 135 N-cm |
* All specifications are at room temperature unless otherwise specified.
Specification Notes
[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Transverse sensitivity is typically ≤ 3%.
[4] 200°F to 250°F data valid with HT option only.
Accessories
|
Supplied |
||
|
ACS-1 |
Single axis amplitude response calibration from 10 Hz to upper 5% frequency, NIST traceable |
1 |
|
080A109 |
Petro Wax, one square, 1" x 1" x 0.25" |
1 |
|
080A15 |
Adhesive mtg base, 0.312" hex x 0.125" thk, 5-40 tapped hole, aluminum w/isolation hardcoat finish |
1 |
Optional Versions
(A) Adhesive Mount
|
Accessories |
|||
|
Supplied |
080A90 |
Quick Bonding Gel |
1 |
(HT) High temperature, extends normal operation temperatures
|
|
ENG |
SI |
|
Broadband Resolution |
0.0002 g rms |
0.002 m/s² rms |
|
Frequency Range |
5 Hz |
|
|
Frequency Range |
3 Hz |
|
|
Frequency Range |
2 Hz |
|
|
Discharge Time Constant |
0.08 to 0.24 sec |
|
|
Spectral Noise |
75 µg/√Hz |
736 (µm/sec2)/√Hz |
|
Spectral Noise |
5 µg/√Hz |
49 (µm/sec2)/√Hz |
|
Spectral Noise |
25 µg/√Hz |
245 (µm/sec2)/√Hz |
|
Spectral Noise |
1.5 µg/√Hz |
14.7 (µm/sec2)/√Hz |
|
Temperature Range |
-65 to +250 °F |
-54 to +121 °C |
(J) Ground Isolated
|
|
ENG |
SI |
|
Frequency Range |
8000 Hz |
|
|
Frequency Range |
10000 Hz |
|
|
Frequency Range |
16000 Hz |
|
|
Resonant Frequency |
30 kHz |
|
|
Electrical Isolation |
≥100000000 Ohm |
|
|
Size - Hex |
0.37 in |
9.5 mm |
|
Size - Height |
0.55 in |
|
|
Weight |
0.1 oz |
2.8 gm |
(M) Metric Mount
|
|
ENG |
SI |
|
Mounting Thread |
M3 x 0.50 Male |
|
(
(W) Water Resistant Cable