Accelerometer ICP® Model 355B04
Ring-style, high sensitivity, ceramic shear ICP® accel., 1 V/g,
1 to 8k Hz, 10-32 side conn. The high sensitivity and low noise
allows for measurement of micro-vibration.
- Sensitivity: (±10%) 1000 mV/g (101.9 mV/(m/s²))
- Measurement Range: ±5 g pk (±49 m/s² pk)
- Broadband Resolution: 0.0001 g rms (0.001 m/s² rms)
- Frequency Range: (±5%)1 to 8000 Hz
- Sensing Element: Ceramic
- Weight: 11.2 gm
|
|
ENG |
SI |
|
Performance |
|
|
|
Sensitivity (±10 %) |
1000 mV/g |
101.9 mV/(m/s²) |
|
Measurement Range |
±5 g pk |
±49 m/s² pk |
|
Frequency Range (±5 %) |
1 to 8000 Hz |
1 to 8000 Hz |
|
Frequency Range (±10 %) |
0.6 to 12000 Hz |
0.6 to 12000 Hz |
|
Frequency Range (±3 dB) |
0.3 to 17000 Hz |
0.3 to 17000 Hz |
|
Resonant Frequency |
≥30 kHz |
≥30 kHz |
|
Broadband Resolution (1) [2] |
0.0001 g rms |
0.001 m/s² rms |
|
Non-Linearity [1] |
≤1 % |
≤1 % |
|
Transverse Sensitivity [3] |
≤5 % |
≤5 % |
|
Environmental |
|
|
|
Overload Limit (Shock) |
±5000 g pk |
±49000 m/s² pk |
|
Temperature Range (Operating) |
-65 to +200 °F |
-54 to +93 °C |
|
Temperature Response [2] |
See Graph %/°F |
See Graph %/°F |
|
Base Strain Sensitivity [2] |
0.05 g/µε |
|
|
Electrical |
|
|
|
Excitation Voltage |
18 to 30 VDC |
18 to 30 VDC |
|
Constant Current Excitation |
2 to 4 mA |
2 to 4 mA |
|
Output Impedance |
≤1000 Ohm |
≤1000 Ohm |
|
Output Bias Voltage |
8 to 12 VDC |
8 to 12 VDC |
|
Discharge Time Constant |
0.5 to 2 sec |
0.5 to 2 sec |
|
Spectral Noise (10 Hz) [2] |
4 µg/√Hz |
39 (µm/sec2)/√Hz |
|
Spectral Noise (100 Hz) [2] |
2 µg/√Hz |
20 (µm/sec2)/√Hz |
|
Spectral Noise (1 kHz) [2] |
0.5 µg/√Hz |
4.9 (µm/sec2)/√Hz |
|
Electrical Isolation (Base) |
>100000000 Ohm |
>100000000 Ohm |
|
Physical |
|
|
|
Size - Length |
0.95 in |
24.1 mm |
|
Size - Width |
0.63 in |
16.0 mm |
|
Weight [2] |
|
11.2 gm |
|
Sensing Element |
Ceramic |
Ceramic |
|
Sensing Geometry |
Shear |
Shear |
|
Housing Material |
Titanium |
Titanium |
|
Sealing |
Hermetic |
Hermetic |
|
Electrical Connector |
10-32 Coaxial Jack |
10-32 Coaxial Jack |
|
Electrical Connection Position |
Side |
Side |
|
Mounting |
Through Hole |
Through Hole |
* All specifications are at room temperature unless otherwise specified.
Specification Notes
[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Transverse sensitivity is typically ≤ 3%.
[4] See PCB Declaration of Conformance PS023 for details.
Accessories
|
Supplied |
||
|
ACS-1 |
Single axis amplitude response calibration from 10 Hz to upper 5% frequency, NIST traceable |
1 |
|
039A22 |
Allen wrench, 7/64" hex head (for use with 6-32 thd cap screws) |
1 |
|
080A109 |
Petro Wax, one square, 1" x 1" x 0.25" |
1 |
|
081B45 |
Off ground socket head cap screw assembly, 6-32 UNC-2A thd., 0.63 length, stainless steel. |
1 |
Optional Versions
(M) Metric Mount
|
Accessories: |
|||
|
Supplied |
M039A22 |
Allen wrench for use with M3 thread |
1 |
|
Supplied |
M081B45 |
Accessory for Vibration Division Product |
1 |
(W) Water Resistant Cable