Differential VC MEMS Accelerometer - Model 3741F12200G
Differential VC MEMS accelerometer, 13.5 mV/g, 200 g,
10-ft integral cable, pigtail termination.
- Sensitivity: (±3%) 13.5 mV/g (1.38 mV/(m/s²))
- Measurement Range: ±200 g pk (±1961.3 m/s² pk)
- Broadband Resolution: 6.0 mg rms (0.06 m/s² rms)
- Temperature Range: -54.0 to +121 °C
- Frequency Range: (±5%) 0 to 1500 Hz
- Electrical Connector: Integral Cable
|
|
ENG |
SI |
|
Performance |
|
|
|
Sensitivity (±3 %) [3] |
13.5 mV/g |
1.38 mV/(m/s²) |
|
Measurement Range |
±200 g pk |
±1961.3 m/s² pk |
|
Frequency Range (±5 %) |
0 to 1500 Hz |
0 to 1500 Hz |
|
Frequency Range (±10 %) |
0 to 2500 Hz |
0 to 2500 Hz |
|
Resonant Frequency [2] |
11.8 kHz |
11.8 kHz |
|
Phase Response (10 Hz) |
<10.0 ° |
<10.0 ° |
|
Non-Linearity (Typical) [1] |
0.3 % |
0.3 % |
|
Non-Linearity (Max) [1] |
1 % |
1 % |
|
Broadband Resolution (0.5) [2] |
6.0 mg rms |
0.06 m/s² rms |
|
Transverse Sensitivity (Typical) |
1 % |
1 % |
|
Transverse Sensitivity (Max) |
3 % |
3 % |
|
Environmental |
|
|
|
Overload Limit (Shock) |
±5000 g pk |
±49050 m/s² pk |
|
Temperature Range (Operating) |
-65 to +250 °F |
-54 to +121 °C |
|
Temperature Range (Storage) |
-65 to +250 °F |
-54 to +121 °C |
|
Temperature Coefficient of Sensitivity [4] |
±2.5 % |
±2.5 % |
|
Temperature Coefficient of Sensitivity [2] [4] |
±1 % |
±1 % |
|
Zero g Offset Temperature Coefficient [2] [4] [5] |
±1 % FSO |
±1 % FSO |
|
Base Strain Sensitivity [2] |
0.001 g/µε |
|
|
Magnetic Sensitivity [2] |
40 µg/gauss |
3.9 (m/s²)/Tesla |
|
Electrical |
|
|
|
Excitation Voltage |
5 to 32 VDC |
5 to 32 VDC |
|
Current Consumption |
≤5 mA |
≤5 mA |
|
Output Impedance |
≤120 Ohm |
≤120 Ohm |
|
Offset Voltage [6] |
±20 mVDC |
±20 mVDC |
|
Common Mode Voltage (±0.1 VDC) |
+1.65 VDC |
+1.65 VDC |
|
Spectral Noise (1 Hz) [2] |
600 µg/√Hz |
5886 (µm/sec2)/√Hz |
|
Spectral Noise (10 Hz) [2] |
600 µg/√Hz |
5886 (µm/sec2)/√Hz |
|
Spectral Noise (100 Hz) [2] |
600 µg/√Hz |
5886 (µm/sec2)/√Hz |
|
Electrical Isolation (Case) |
>100000000 Ohm |
>100000000 Ohm |
|
Physical |
|
|
|
Housing Material |
Anodized Aluminum |
Anodized Aluminum |
|
Sealing |
Epoxy |
Epoxy |
|
Size - Height |
|
7.62 mm |
|
Size - Length |
1.0 in |
25.4 mm |
|
Size - Width |
0.85 in |
21.6 mm |
|
Weight (without cable)[2] |
|
9.92 gm |
|
Electrical Connector |
Integral Cable |
Integral Cable |
|
Electrical Connection Position |
Side |
Side |
|
Cable Type |
010 4-cond Shielded |
010 4-cond Shielded |
|
Cable Length |
10 ft |
3 m |
|
Mounting |
Through Hole |
Through Hole |
* All specifications are at room temperature unless otherwise specified.
Specification Notes
[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Measured at 100 Hz, 10.0 grms.
[4] -65 to +250 °F, ref. 75 °F (-54 to +121 °C, ref. 24 °C)
[5] FSO= Full Scale Output over the Measurement Range
[6] Offset tolerance is based on 10 ft of 010 test cable.
[7] Case and shield to mounting surface or cable leads
[8] See PCB Declaration of Conformance PS027 for details.
Accessories
|
Supplied |
||
|
081A103 |
4-40 threaded black-oxide alloy steel socket head cap screw with stainless steel washer (for series (for series 3741, 354x04/05) |
2 |
|
M081A103 |
M3x0.5 mm threaded black-oxide alloy steel socket head cap screw, 10 mm long with stainless steel washer (for 354x04/05) |
2 |
|
Optional |
||
|
080A208 |
Triaxial mounting block, aluminum, for use with 3741 Series |
1 |