ICP® MICROPHONE, ACUOSTIC PRESSURE SENSOR Model 106B

ICP^® Acoustic Pressure Sensor, 300 mV/psi, resolution 0.0001 psi (+91 dB), accel. comp.

	ENG	SI
Performance
Measurement Range (for ±5V output)	8.0 psi	55.1 кПа
Sensitivity (±15%)	300 mV/psi	43.5 mV/kPa
Maximum Pressure (step)	200 psi	1379 kPa
Maximum Pressure (total)	2000 psi	13790 kPa
Resolution [2]	0001 psi	0.00069 kPa
Resonant Frequency	≥60 kHz	≥60 kHz
Rise Time	≤9.0 µ sec	≤9.0 µ sec
Low Frequency Response (-5 %)	0.5 Hz	0.5 Hz
Non-Linearity [1]	≤1.0 % FS	≤1.0 % FS
Environmental
Acceleration Sensitivity [2]	0.002 psi/g	0.0014 kPa/(m/s²)
Temperature Range (Operating)	-100 to +250 °F	-73 to +121 °C
Temperature Coefficient of Sensitivity	≤0.03 %/°F	≤0.054 %/°C
Maximum Flash Temperature	3000 °F	1650 °C
Maximum Vibration	1000 g pk	9800 m/s² pk
Maximum Shock	2000 g pk	19600 m/s² pk
Electrical
Output Polarity (Positive Pressure)	Positive	Positive
Discharge Time Constant (at room temp)	≥1.0 sec	≥1.0 sec
Excitation Voltage	12 to 30 VDC	12 to 30 VDC
Constant Current Excitation	2 to 20 mA	2 to 20 mA
Output Impedance	≤100 Ohm	≤100 Ohm
Output Bias Voltage	3 to 8 VDC	3 to 8 VDC
Physical
Sensing Element	Quartz	Quartz
Housing Material	304/304L Stainless Steel	304/304L Stainless Steel
Diaphragm	316L Stainless Steel	316L Stainless Steel
Sealing	Welded Hermetic	Welded Hermetic
Electrical Connector	10-32 Coaxial Jack	10-32 Coaxial Jack
Weight	0.63 oz	18.0 gm

* All specifications are at room temperature unless otherwise specified.

Specification Notes

[1] Zero-based, least-squares, straight line method.

[2] Typical.

[3] Used with optional mounting adaptor.

[4] See PCB Declaration of Conformance PS023 for details.

Accessories

Supplied
PCS-1	Calibration of dynamic pressure sensors at 20% intervals to full scale, max 15 kpsi range.	0
PCS-17		0
PCS-24		0
060A12	Clamp nut, 9/16-18-2A thd, 9/16" hex (for Models 106B & 116B)	1
060A14	Metric clamp nut, M14 x 1.25-6G thd, 14 mm hex, SS (for Models M106B & M116B)	1
065A37	Seal ring, 0.497" OD x 0.437" ID x 0.025" thick, brass (for Model 106B)	3

Optional Versions

(E) Emralon coating

(J) Ground Isolated

	ENGLISH	SI
Electrical Isolation	100000000 Ohm

(T) TEDS Capable of Digital Memory and Communication Compliant with IEEE P1451.4

	ENGLISH	SI
Output Bias Voltage	3.7 to 8.7 VDC

(W) Water Resistant Cable

Accessories:
Supplied	060A11	Acetal clamp nut 3/4-16-2A thd 3/4" hex	1

(WM) Water Resistant Cable

Accessories:
Supplied	060A13	Metric Acetal clamp nut M20 x 1.5-6g thd 20 mm hex	1