Cryogenic Charge Pressure Sensors Model 112B05

Wide temperature -400F to +500F (-240 Cto + 260C) pressure sensor, 5000 psi, 1 pC/psi, 0.218" dia. SS diaphragm, accel. comp., 5-point cal ranges at 5kpsi, 500psi and 100psi.

Measurement Range: 5000 psi (34475 kPa)
Sensitivity: (±15%) 1.1 pC/psi (0.16 pC/kPa)
Resonant Frequency: >=200 kHz (>=200 kHz)
Electrical Connector: 10-32 Coaxial Jack
Weight: 0.21 oz (6 gm)

	ENG	SI
Performance
Sensitivity (±15 %)	1.1 pC/psi	0.16 pC/kPa
Measurement Range	5000 psi	34475 kPa
Maximum Pressure (total)	10000 psi	68950 kPa
Resonant Frequency	≥200 kHz	≥200 kHz
Rise Time (reflected)	≤2.0 µ sec	≤2.0 µ sec
Non-Linearity [1]	≤1.0 % FS	≤1.0 % FS
Environmental
Maximum Shock	10000 g pk	98000 m/s² pk
Acceleration Sensitivity [2]	0.003 psi/g	0021 kPa/(m/s²)
Temperature Range (Operating)	-400 to +500 °F	-240 to +260 °C
Maximum Flash Temperature	3000 °F	1649 °C
Maximum Vibration	5000 g pk	49000 m/s² pk
Electrical
Output Polarity (Positive Pressure)	Negative	Negative
Capacitance [2]	24 pF	24 pF
Insulation Resistance (500°F/260°C)	≥1000000000 Ohm	≥1000000000 Ohm
Insulation Resistance (at room temp)	≥1000000000000 Ohm	≥1000000000000 Ohm
Physical
Sensing Element	Quartz	Quartz
Sensing Geometry	Compression	Compression
Housing Material	17-4 Stainless Steel	17-4 Stainless Steel
Diaphragm	Stainless Steel 316L	Stainless Steel 316L
Sealing	Welded Hermetic	Welded Hermetic
Electrical Connector	10-32 Coaxial Jack	10-32 Coaxial Jack
Weight (with clamp nut)	21 oz	6 gm

* All specifications are at room temperature unless otherwise specified.

Specification Notes

[1] Zero-based, least-squares, straight line method.

[2] Typical.

[3] See PCB Declaration of Conformance 158 for details.

Accessories

Supplied
PCS-10	Single point sensitivity coefficient at sensor maximum operating temperature	0
PCS-1BA		0
060A03	Clamp nut, 5/16-24-2A thd, 1/4" hex, SS (for Series 111, 112 & 113)	1
060A05	Clamp nut, M7 x 0.75-6G thd (for Series M111, M112 & M113)	1
065A05	Seal sleeve, sensor recess mount, 0.248" OD x 0.221" ID x 0.240" thk, 17-4 SS (for Series 111A, 112A & 113A)	1
065A29	Seal, 0.250" OD x 0.218" ID x 0.015" thk, stainless steel (minimum order 5 each)	2
065A02	Seal ring, sensor flush mount, 0.248" OD x 0.219" ID x 0.015" thk, brass (for Series 111A, 112A & 113A)	3

Optional Versions

(P) Positive Output Polarity

	English	SI
Output Polarity	Positive

(W) Water Resistant Cable

Accessories:
Supplied	060A03	Clamp nut, 5/16-24-2A thd, 1/4" hex, stainless steel	1

(WM) Water Resistant Cable

Accessories:
Supplied	060A05	Clamp nut M7 x 0.75-6g thd	1