• endevco® angular rate & 6dof sensors
  • pressure transducers for research & development
  • accelerometers for research & development
  • испытательное оборудование dewesoft
  • давление и перепад давлений
  • конфигуратор / коммуникатор
  • позиционеры
  • уровень, плотность, граница раздела жидкостей
  • кожух термозащитный подогреваемый
  • нагреваемые шланги teat
  • TURMALINE ICP® PRESSURE SENSOR Model 134A24

    Tourmaline ICP® pressure bar with 003 cable and inline source follower, 1000 psi, 5 mV/psi, 0.2 microsecond rise time.

     

    • Measurement Range: 1000 psi (6895 kPa)
    • Sensitivity: (±15%) 5 mV/psi (0.73 mV/kPa)
    • Resonant Frequency: >=1500 kHz
    • Low Frequency Response: (-5%) 0.25 Hz
    • Electrical Connector: 10-32 Coaxial Jack
    • Weight: 1.4 oz (39 gm)

     

     

    ENG

    SI

    Performance

    Measurement Range (for ±5V output)

    1000 psi

    6895 kPa

    Useful Overrange (for ± 10V output) [3]

    2000 psi

    13790 kPa

    Sensitivity (±15 %) [4]

    5 mV/psi

    0.73 mV/kPa

    Maximum Pressure

    15000 psi

    103425 kPa

    Resolution [2]

    0.02 psi

    1. 14 kPa

    Resonant Frequency

    ≥1500 kHz

    ≥1500 kHz

    Rise Time

    ≤0.2 µ sec

    ≤0.2 µ sec

    Low Frequency Response (-5 %)

    1. 25 Hz
    2. 25 Hz
     

    Non-Linearity [1]

    ≤2.0 % FS

    ≤2.0 % FS

    Environmental

    Temperature Range (Operating)

    -32 to +120 °F

    -36 to +49 °C

    Maximum Flash Temperature

    5000 °F

    2760 °C

    Electrical

    Output Polarity (Positive Pressure)

    Positive

    Positive

    Discharge Time Constant (at room temp)

    ≥1 sec

    ≥1 sec

    Excitation Voltage

    20 to 30 VDC

    20 to 30 VDC

    Constant Current Excitation

    2 to 20 mA

    2 to 20 mA

    Output Impedance

    ≤100 Ohm

    ≤100 Ohm

    Output Bias Voltage

    8 to 14 VDC

    8 to 14 VDC

    Physical

    Sensing Element

    Tourmaline

    Tourmaline

    Housing Material

    Stainless Steel

    Stainless Steel

    Sealing

    Epoxy

    Epoxy

    Electrical Connector

    10-32 Coaxial Jack

    10-32 Coaxial Jack

    Weight [2]

    1.4 oz

    39 gm

     

    * All specifications are at room temperature unless otherwise specified.

     

    Specification Notes

     

    [1] Zero-based, least-squares, straight line method.

    [2] Typical.

    [3] For +10 volt output, minimum 24 VDC supply voltage required. Negative 10 volt output may be limited by output bias.

    [4] Calibrated as a system using (3 inch) type 003 cable and 402A series in-line amplifier.

    [5] See PCB Declaration of Conformance PS023 for details.

     

    Accessories

     

    Supplied

    PCS-6AB

     

    0

    061A30

    Spanner Wrench, 2-pin, for Series 134A and Model 132A36

    1