Accelerometer ICP® Model 333B
Modal array, ceramic shear ICP® accel, 100 mV/g, 2 to 1k Hz,
3-pin conn mtg block, cable/connector not included.
Cable assembly to be used is model 009M202/XXXCC,
where "XXX" delineates the length in feet
(prefix the model with an "M" for meters) and "CC" delineates
whether it terminates to the PD or PE connectors.
- Sensitivity: (±20%) 100 mV/g (10.2 mV/(m/s²))
- Measurement Range: ±50 g pk (±490 m/s² pk)
- Broadband Resolution: 0.00007 g rms (0.0007 m/s² rms)
- Frequency Range: (±5%) 2 to 1000 Hz
- Sensing Element: Ceramic
- Weight: 5.6 gm
|
|
ENG |
SI |
|
Performance |
|
|
|
Sensitivity (±20 %) |
100 mV/g |
10.2 mV/(m/s²) |
|
Measurement Range |
±50 g pk |
±490 m/s² pk |
|
Frequency Range (±5 %) |
2 to 1000 Hz |
2 to 1000 Hz |
|
Resonant Frequency |
≥5 kHz |
≥5 kHz |
|
Phase Response (±5 °) |
2 to 1000 Hz |
2 to 1000 Hz |
|
Broadband Resolution (1) [2] |
0.00007 g rms |
0.0007 m/s² rms |
|
Non-Linearity [1] |
≤1 % |
≤1 % |
|
Transverse Sensitivity [3] |
≤5 % |
≤5 % |
|
Environmental |
|
|
|
Overload Limit (Shock) |
±3500 g pk |
±34300 m/s² pk |
|
Temperature Range (Operating) |
0 to +150 °F |
-18 to +66 °C |
|
Base Strain Sensitivity [2] |
|
|
|
Electrical |
|
|
|
Excitation Voltage |
18 to 30 VDC |
18 to 30 VDC |
|
Constant Current Excitation |
2 to 20 mA |
2 to 20 mA |
|
Output Impedance |
≤100 Ohm |
≤100 Ohm |
|
Output Bias Voltage |
8 to 12 VDC |
8 to 12 VDC |
|
Discharge Time Constant |
0.7 to 1.3 sec |
0.7 to 1.3 sec |
|
Spectral Noise (10 Hz) [2] |
4.3 µg/√Hz |
42.1 (µm/sec2)/√Hz |
|
Spectral Noise (100 Hz) [2] |
1.3 µg/√Hz |
12.8 (µm/sec2)/√Hz |
|
Spectral Noise (1000 Hz) [2] |
0.6 µg/√Hz |
5.9 (µm/sec2)/√Hz |
|
Physical |
|
|
|
Weight [2] |
|
5.6 gm |
|
Sensing Element |
Ceramic |
Ceramic |
|
Sensing Geometry |
Shear |
Shear |
|
Housing Material |
Polymer |
Polymer |
|
Sealing |
Hermetic |
Hermetic |
|
Size - Diameter |
0.48 in |
12.2 mm |
|
Electrical Connector |
3-Pin Socket |
3-Pin Socket |
* All specifications are at room temperature unless otherwise specified.
Specification Notes
[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Transverse sensitivity is typically ≤ 3%.
Accessories
|
Supplied |
||
|
ACS-2 |
Single axis, one-point at 100 Hz, amplitude response calibration, NIST traceable |
1 |
Optional Versions
(T) TEDS Capable of Digital Memory and Communication Compliant with IEEE P1451.4
|
|
ENG |
SI |
|
Output Bias Voltage |
8.5 to 13 VDC |
|
(TLA) TEDS LMS International - Free Format
|
|
ENG |
SI |
|
Output Bias Voltage |
8.5 to 13 VDC |
|
(TLB) TEDS LMS International - Automotive Format
|
|
ENG |
SI |
|
Output Bias Voltage |
8.5 to 13 VDC |
|
(TLC) TEDS LMS International - Aeronautical Format
|
|
ENG |
SI |
|
Output Bias Voltage |
8.5 to 13 VDC |
|
(TLD) TEDS Capable of Digital Memory and Communication Compliant with IEEE 1451.4
|
|
ENG |
SI |
|
Output Bias Voltage |
8.5 to 13 VDC |
|