Accelerometer ICP® Model 333B

Modal array, ceramic shear ICP® accel, 100 mV/g, 2 to 1k Hz, 3-pin conn mtg block, cable/connector not included.

Cable assembly to be used is model 009M202/XXXCC, where "XXX" delineates the length in feet (prefix the model with an "M" for meters) and "CC" delineates whether it terminates to the PD or PE connectors.

Sensitivity: (±20%) 100 mV/g (10.2 mV/(m/s²))
Measurement Range: ±50 g pk (±490 m/s² pk)
Broadband Resolution: 0.00007 g rms (0.0007 m/s² rms)
Frequency Range: (±5%) 2 to 1000 Hz
Sensing Element: Ceramic
Weight: 5.6 gm

	ENG	SI
Performance
Sensitivity (±20 %)	100 mV/g	10.2 mV/(m/s²)
Measurement Range	±50 g pk	±490 m/s² pk
Frequency Range (±5 %)	2 to 1000 Hz	2 to 1000 Hz
Resonant Frequency	≥5 kHz	≥5 kHz
Phase Response (±5 °)	2 to 1000 Hz	2 to 1000 Hz
Broadband Resolution (1) [2]	0.00007 g rms	0.0007 m/s² rms
Non-Linearity [1]	≤1 %	≤1 %
Transverse Sensitivity [3]	≤5 %	≤5 %
Environmental
Overload Limit (Shock)	±3500 g pk	±34300 m/s² pk
Temperature Range (Operating)	0 to +150 °F	-18 to +66 °C
Base Strain Sensitivity [2]	15 g/µε 27 (m/s²)/µε
Electrical
Excitation Voltage	18 to 30 VDC	18 to 30 VDC
Constant Current Excitation	2 to 20 mA	2 to 20 mA
Output Impedance	≤100 Ohm	≤100 Ohm
Output Bias Voltage	8 to 12 VDC	8 to 12 VDC
Discharge Time Constant	0.7 to 1.3 sec	0.7 to 1.3 sec
Spectral Noise (10 Hz) [2]	4.3 µg/√Hz	42.1 (µm/sec²)/√Hz
Spectral Noise (100 Hz) [2]	1.3 µg/√Hz	12.8 (µm/sec²)/√Hz
Spectral Noise (1000 Hz) [2]	0.6 µg/√Hz	5.9 (µm/sec²)/√Hz
Physical
Weight [2]	2 oz	5.6 gm
Sensing Element	Ceramic	Ceramic
Sensing Geometry	Shear	Shear
Housing Material	Polymer	Polymer
Sealing	Hermetic	Hermetic
Size - Diameter	0.48 in	12.2 mm
Electrical Connector	3-Pin Socket	3-Pin Socket

* All specifications are at room temperature unless otherwise specified.

Specification Notes

[1] Zero-based, least-squares, straight line method.

[2] Typical.

[3] Transverse sensitivity is typically ≤ 3%.

Accessories

Supplied
ACS-2	Single axis, one-point at 100 Hz, amplitude response calibration, NIST traceable	1

Optional Versions

(T) TEDS Capable of Digital Memory and Communication Compliant with IEEE P1451.4

	ENG	SI
Output Bias Voltage	8.5 to 13 VDC

(TLA) TEDS LMS International - Free Format

	ENG	SI
Output Bias Voltage	8.5 to 13 VDC

(TLB) TEDS LMS International - Automotive Format

	ENG	SI
Output Bias Voltage	8.5 to 13 VDC

(TLC) TEDS LMS International - Aeronautical Format

	ENG	SI
Output Bias Voltage	8.5 to 13 VDC

(TLD) TEDS Capable of Digital Memory and Communication Compliant with IEEE 1451.4

	ENG	SI
Output Bias Voltage	8.5 to 13 VDC