Accelerometer ICP® Model 333B52

Modal array, ceramic shear ICP® accel, 1000 mV/g, 0.5 to 3k Hz, 10-32 side conn., adhesive mount. The high sensitivity and low noise allows for measurement of micro-vibration.

Sensitivity: (±10%) 1000 mV/g (102.0 mV/(m/s²))
Measurement Range: ±5 g pk (±49 m/s² pk)
Broadband Resolution: 0.00005 g rms (0.0005 m/s² rms)
Frequency Range: (±5%) 0.5 to 3000 Hz
Sensing Element: Ceramic
Weight: 7.5 gm

	ENG	SI
Performance
Sensitivity (±10 %)	1000 mV/g	102.0 mV/(m/s²)
Measurement Range	±5 g pk	±49 m/s² pk
Frequency Range (±5 %)	5 to 3000 Hz 5 to 3000 Hz
Resonant Frequency	≥20 kHz	≥20 kHz
Phase Response (±5 °) (at 70°F [21°C])	2.5 to 3000 Hz	2.5 to 3000 Hz
Broadband Resolution (1) [2]	0.00005 g rms	0.0005 m/s² rms
Non-Linearity [1]	≤1 %	≤1 %
Transverse Sensitivity [3]	≤5 %	≤5 %
Environmental
Overload Limit (Shock)	±4000 g pk	±39000 m/s² pk
Temperature Range (Operating)	0 to +150 °F	-18 to +66 °C
Temperature Response [2]	See Graph %/°F	See Graph %/°F
Base Strain Sensitivity [2]	0.01 g/µε	0.1 (m/s²)/µε
Electrical
Excitation Voltage	18 to 30 VDC	18 to 30 VDC
Constant Current Excitation	2 to 20 mA	2 to 20 mA
Output Impedance	≤500 Ohm	≤500 Ohm
Output Bias Voltage	7 to 12 VDC	7 to 12 VDC
Discharge Time Constant	0.7 to 2.0 sec	0.7 to 2.0 sec
Spectral Noise (1 Hz) [2]	15 µg/√Hz	150 (µm/sec²)/√Hz
Spectral Noise (10 Hz) [2]	3.8 µg/√Hz	37 (µm/sec²)/√Hz
Spectral Noise (100 Hz) [2]	1.1 µg/√Hz	11 (µm/sec²)/√Hz
Spectral Noise (1000 Hz) [2]	0.4 µg/√Hz	3.9 (µm/sec²)/√Hz
Physical
Size - Length	68 in	17.3 mm
Size - Width	45 in	11.4 mm
Size - Height	45 in	11.4 mm
Weight [2]	26 oz	7.5 gm
Sensing Element	Ceramic	Ceramic
Sensing Geometry	Shear	Shear
Housing Material	Titanium	Titanium
Sealing	Hermetic	Hermetic
Electrical Connector	10-32 Coaxial Jack	10-32 Coaxial Jack
Electrical Connection Position	Side	Side
Mounting	Adhesive	Adhesive

* All specifications are at room temperature unless otherwise specified.

Specification Notes

[1] Zero-based, least-squares, straight line method.

[2] Typical.

[3] Transverse sensitivity is typically ≤ 3%.

[4] See PCB Declaration of Conformance PS023 for details.

Accessories

Supplied
ACS-1	Single axis amplitude response calibration from 10 Hz to upper 5% frequency, NIST traceable	1
080A109	Petro Wax, one square, 1" x 1" x 0.25"	1
080A90	Quick bond Gel (for use with accel adhesive mtg bases to fill gaps on rough surfaces)	1

Optional Versions

(T) TEDS Capable of Digital Memory and Communication Compliant with IEEE P1451.4

	ENG	SI
Output Bias Voltage	7.5 to 13 VDC

(TLA) TEDS LMS International - Free Format

	ENG	SI
Output Bias Voltage	7.5 to 13 VDC

(TLB) TEDS LMS International - Automotive Format

	ENG	SI
Output Bias Voltage	7.5 to 13 VDC

(TLC) TEDS LMS International - Aeronautical Format

	ENG	SI
Output Bias Voltage	7.5 to 13 VDC

(TLD) TEDS Capable of Digital Memory and Communication Compliant with IEEE 1451.4

	ENG	SI
Вихідна напруга зсуву	від 7,5 до 13 V DC