	ENG	SI
Performance
Sensitivity (±10 %)	100 mV/g	10.2 mV/(m/s²)
Measurement Range	±50 g pk	±490 m/s² pk
Frequency Range (±5 %)	0.5 to 10000 Hz	0.5 to 10000 Hz
Frequency Range (±10 %)	0.3 to 15000 Hz	0.3 to 15000 Hz
Resonant Frequency	≥50 kHz	≥50 kHz
Broadband Resolution (1) [2]	0.0005 g rms	0.005 m/s² rms
Non-Linearity [1]	≤1 %	≤1 %
Transverse Sensitivity [3]	≤5 %	≤5 %
Environmental
Overload Limit (Shock)	±5000 g pk	±49000 m/s² pk
Temperature Range (Operating)	-65 to +200 °F	-54 to +93 °C
Temperature Response [2] [3]	See Graph %/°F	See Graph %/°F
Base Strain Sensitivity [2]	0.003 g/µε	0.029 (m/s²)/µε
Electrical
Excitation Voltage	18 to 30 VDC	18 to 30 VDC
Constant Current Excitation	2 to 20 mA	2 to 20 mA
Output Impedance	≤200 Ohm	≤200 Ohm
Output Bias Voltage	7 to 12 VDC	7 to 12 VDC
Discharge Time Constant	1.0 to 2.5 sec	1.0 to 2.5 sec
Settling Time	<10 sec	<10 sec
Spectral Noise (1 Hz) [2]	39 µg/√Hz	380 (µm/sec²)/√Hz
Spectral Noise (10 Hz) [2]	11 µg/√Hz	110 (µm/sec²)/√Hz
Spectral Noise (100 Hz) [2]	3.4 µg/√Hz	33 (µm/sec²)/√Hz
Spectral Noise (1 kHz) [2]	1.4 µg/√Hz	14 (µm/sec²)/√Hz
Physical
Size - Height	62 in	15.7 mm
Size - Hex	0.44 in	11.2 mm
Weight [2]	0.20 oz	5.8 gm
Sensing Element	Ceramic	Ceramic
Sensing Geometry	Shear	Shear
Housing Material	Titanium	Titanium
Sealing	Hermetic	Hermetic
Electrical Connector	10-32 Coaxial Jack	10-32 Coaxial Jack
Electrical Connection Position	Side	Side
Mounting Thread	10-32 Female	10-32 Female
Mounting Torque	10 to 20 in-lb	113 to 226 N-cm

* All specifications are at room temperature unless otherwise specified.

Specification Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Transverse sensitivity is typically ≤ 3%.
[2] Typical.
[4] 200°F to 325°F data valid with HT option only.
[2] Typical.
[5] TEDS option adds 1.0 VDC to bias voltage.
[2] Typical.
[6] See PCB Declaration of Conformance PS023 for details.

Accessories

Supplied
ACS-1	Single axis amplitude response calibration from 10 Hz to upper 5% frequency, NIST traceable	1
080A	Adhesive mtg base, 0.5" hex x 0.187" thk, 10-32 tapped hole, aluminum w/isolation hardcoat finish	1
080A109	Petro Wax, one square, 1" x 1" x 0.25"	1
081B05	Mounting stud, 10-32 to 10-32, 0.275" long, BeCu w/shoulder	1
M081B05	Mounting stud, 10-32 to M6x0.75-6g, 0.275" long, BeCu	1

Optional Versions

(HT) High temperature, extends normal operation temperatures

	ENG	SI
Output Bias Voltage	10 to 15 VDC
Frequency Range (±5 %)	6 to 10000 Hz
Frequency Range (±10 %)	4.5 to 15000 Hz
Temperature Range	-65 to +325	-54 to +163
Discharge Time Constant	0.07 to 0.15 sec
Spectral Noise	58 µg/√Hz	570 (µm/sec²)/√Hz
Spectral Noise	9.8 µg/√Hz	96 (µm/sec²)/√Hz
Spectral Noise	41 µg/√Hz	400 (µm/sec²)/√Hz
Spectral Noise	107 µg/√Hz	1050 (µm/sec²)/√Hz
Broadband Resolution	0.0009 g rms	0.009 m/s² rms
Excitation Voltage	22 to 30 VDC

(J) Ground Isolated

	ENG	SI
Electrical Isolation	>100000000 Ohm
Size - Height	0.67 in	23.6 mm
Weight	0.21 oz	17.0 mm
Frequency Range	9000 Hz
Frequency Range	14000 Hz
Resonant Frequency	40 kHz
Size - Hex	0.44 in	11.2 mm

(T) TEDS Capable of Digital Memory and Communication Compliant with IEEE P1451.4

	ENG	SI
Temperature Range	-10 to +200 °F	-23 to +93 °C
Output Bias Voltage	7.5 to 13 VDC
Excitation Voltage	20 to 30 VDC

(TLA) TEDS LMS International - Free Format

	ENG		SI
Excitation Voltage	20 to 30 VDC
Output Bias Voltage	7.5 to 13 VDC
Temperature Range	-10 to +200 °F	-23 to +93 °C

(TLB) TEDS LMS International - Automotive Format

	ENG		SI
Output Bias Voltage	7.5 to 13 VDC
Temperature Range	-10 to +200 °F	-23 to +93 °C
Excitation Voltage	20 to 30 VDC

(TLC) TEDS LMS International - Aeronautical Format

	ENG		SI
Excitation Voltage	20 to 30 VDC
Output Bias Voltage	7.5 to 13 VDC
Temperature Range	-10 to +200 °F	-23 to +93 °C

(W) Water Resistant Cable