Accelerometer ICP® Model 352B
High resolution, ceramic shear ICP® accel., 1000 mV/g, 2 to 10k Hz,
10-32 top conn. The high sensitivity and low noise allows for measurement of micro-vibration.
- Sensitivity: (±5%) 1000 mV/g (101.9 mV/(m/s²))
- Measurement Range: ±5 g pk (±49 m/s² pk)
- Broadband Resolution: 0.00008 g rms (0.0008 m/s² rms)
- Frequency Range: (±5%) 2 to 10000 Hz
- Sensing Element: Ceramic
- Weight: 25 gm
|
|
ENG |
SI |
|
Performance |
|
|
|
Sensitivity (±5 %) |
1000 mV/g |
101.9 mV/(m/s²) |
|
Measurement Range |
±5 g pk |
±49 m/s² pk |
|
Frequency Range (±5 %) |
2 to 10000 Hz |
2 to 10000 Hz |
|
Frequency Range (±10 %) |
1 to 15000 Hz |
1 to 15000 Hz |
|
Resonant Frequency |
≥25 kHz |
≥25 kHz |
|
Broadband Resolution (1) [2] |
0.00008 g rms |
0.0008 m/s² rms |
|
Non-Linearity [1] |
≤1 % |
≤1 % |
|
Transverse Sensitivity |
≤5 % |
≤5 % |
|
Environmental |
|
|
|
Overload Limit (Shock) |
±1000 g pk |
±9810 m/s² pk |
|
Temperature Range (Operating) |
-65 to +200 °F |
-54 to +93 °C |
|
Temperature Response |
See Graph %/°F |
See Graph %/°F |
|
Base Strain Sensitivity [2] |
0.001 g/µε |
|
|
Electrical |
|
|
|
Excitation Voltage |
20 to 30 VDC |
20 to 30 VDC |
|
Constant Current Excitation |
2 to 20 mA |
2 to 20 mA |
|
Output Impedance |
≤500 Ohm |
≤500 Ohm |
|
Output Bias Voltage |
8 to 14 VDC |
8 to 14 VDC |
|
Discharge Time Constant |
0.1 to 0.6 sec |
0.1 to 0.6 sec |
|
Spectral Noise (1 Hz) [2] |
15 µg/√Hz |
147 (µm/sec2)/√Hz |
|
Spectral Noise (10 Hz) [2] |
5 µg/√Hz |
49 (µm/sec2)/√Hz |
|
Spectral Noise (100 Hz) [2] |
2 µg/√Hz |
19.6 (µm/sec2)/√Hz |
|
Spectral Noise (1 kHz) [2] |
1 µg/√Hz |
9.8 (µm/sec2)/√Hz |
|
Physical |
|
|
|
Sensing Element |
Ceramic |
Ceramic |
|
Sensing Geometry |
Shear |
Shear |
|
Housing Material |
Titanium |
Titanium |
|
Sealing |
Welded Hermetic |
Welded Hermetic |
|
Weight [2] |
0.9 oz |
25.0 gm |
|
Electrical Connector |
10-32 Coaxial Jack |
10-32 Coaxial Jack |
|
Electrical Connection Position |
Top |
Top |
|
Mounting Thread |
10-32 Female |
10-32 Female |
|
Mounting Torque |
10 to 20 in-lb |
113 to 226 N-cm |
* All specifications are at room temperature unless otherwise specified.
Specification Notes
[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] See PCB Declaration of Conformance PS023 for details.
Accessories
|
Supplied |
||
|
ACS-1 |
Single axis amplitude response calibration from 10 Hz to upper 5% frequency, NIST traceable |
1 |
|
080A109 |
Petro Wax, one square, 1" x 1" x 0.25" |
1 |
|
080A12 |
Adhesive mtg base, 0.75" hex x 0.2" thk, 10-32 tapped hole, aluminum w/insolation hardcoat finish |
1 |
|
081B05 |
Mounting stud, 10-32 to 10-32, 0.275" long, BeCu w/shoulder |
1 |
|
M081B05 |
Mounting stud, 10-32 to M6x0.75-6g, 0.275" long, BeCu |
1 |
Optional Versions
(J) Ground Isolated
|
|
ENG |
SI |
|
Size - Hex |
0.75 in |
19.1 mm |
|
Size - Height |
1.15 in |
29.2 mm |
|
Electrical Isolation |
>100000000 Ohm |
|
|
Resonant Frequency |
21 kHz |
|
(T) TEDS Capable of Digital Memory and Communication Compliant with IEEE P1451.4
|
|
ENG |
SI |
|
Output Bias Voltage |
7.5 to 13 VDC |
|
|
Temperature Range |
-10 to +200 °F |
-23 to +93 °C |
(TLA) TEDS LMS International - Free Format
|
|
ENG |
SI |
|
Output Bias Voltage |
7.5 to 13 VDC |
|
|
Temperature Range |
-10 to +200 °F |
-23 to +93 °C |
(TLB) TEDS LMS International - Automotive Format
|
|
ENG |
SI |
|
Output Bias Voltage |
7.5 to 13 VDC |
|
|
Temperature Range |
-10 to +200 °F |
-23 to +93 °C |
(TLC) TEDS LMS International - Aeronautical Format
|
|
ENG |
SI |
|
Output Bias Voltage |
7.5 to 13 VDC |
|
|
Temperature Range |
-10 to +200 °F |
-23 to +93 °C |
(TLD) TEDS Capable of Digital Memory and Communication Compliant with IEEE 1451.4
|
|
ENG |
SI |
|
Output Bias Voltage |
7.5 to 13 VDC |
|
|
Temperature Range |
-10 to +200 °F |
-23 to +93 °C |
(W) Water Resistant Cable
|
|
ENG |
SI |
|
Electrical Connector |
Sealed Integral Cable |
|
|
Electrical Connection Position |
Top |
|