Charge Output Accelerometer Model 357A100
UHT-12™, Charge output accel, high temp to to +900 F, 5 pC/g, 200 g,
to 5 kHz, 2-pin connector, 3-hole mount.
- Sensitivity: (±5%) 5 pC/g (0.510 pC/(m/s²))
- Measurement Range: ±200 g pk (±1962 m/s² pk)
- Frequency Range: (±5%) 4 kHz
- Cable Termination: 10-32 Coaxial Jack
- Weight: 65.8 gm
|
|
ENG |
SI |
|
Performance |
|
|
|
Sensitivity (±5 %) |
5 pC/g |
0.510 pC/(m/s²) |
|
Measurement Range |
±200 g pk |
±1962 m/s² pk |
|
Frequency Range (±5 %) [4] |
4000 Hz |
4000 Hz |
|
Frequency Range (±5 %) [4] |
5000 Hz |
5000 Hz |
|
Resonant Frequency [2] |
≥20 kHz |
≥20 kHz |
|
Non-Linearity [1] |
≤1 % |
≤1 % |
|
Transverse Sensitivity [3] |
≤5 % |
≤5 % |
|
Environmental |
|
|
|
Overload Limit (Shock) |
±1000 g pk |
±9810 m/s² pk |
|
Temperature Range (Operating) |
-65 to +900 °F |
-54 to +482 °C |
|
Temperature Response [2] |
See Graph %/°F |
See Graph %/°F |
|
Electrical |
|
|
|
Capacitance (Pin to Pin) [2] |
120 pF |
120 pF |
|
Capacitance (Pin to Case) [2] |
32 pF |
32 pF |
|
Capacitance (Unbalance Between Pins) |
≤2 pF |
≤2 pF |
|
Insulation Resistance ((Pin to Case 70°F) [2] |
>1000000000 Ohm |
>1000000000 Ohm |
|
Insulation Resistance (Pin to Pin 70°F) |
>1000000000 Ohm |
>1000000000 Ohm |
|
Insulation Resistance (Pin to Pin 900°F) |
>100 kohm |
>100 kohm |
|
Output Polarity |
Differential |
Differential |
|
Physical |
|
|
|
Sensing Element |
UHT-12™ |
UHT-12™ |
|
Sensing Geometry |
Shear |
Shear |
|
Housing Material |
Inconel |
Inconel |
|
Sealing |
Hermetic |
Hermetic |
|
Size - Height |
|
19 mm |
|
Size - Diameter |
1.5 in |
38.1 mm |
|
Size - Length |
1.88 in |
47.8 mm |
|
Weight [2] |
2.32 oz |
65.8 gm |
|
Electrical Connector |
7/16-27 2-Pin |
7/16-27 2-Pin |
|
Electrical Connection Position |
Side |
Side |
|
Mounting |
Through Holes (3) |
Through Holes (3) |
* All specifications are at room temperature unless otherwise specified.
Specification Notes
[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Transverse sensitivity is typically ≤ 3%.
[4] Low frequency response is determined by external signal conditioning electronics.
[5] See PCB Declaration of Conformance PS081 for details.
Accessories
|
Supplied |
||
|
081A99 |
Socket head cap screw, 8-32 x 0.5" long, 18-8 stainless steel |
1 |
|
ACS-1 |
Single axis amplitude response calibration from 10 Hz to upper 5% frequency, NIST traceable |
1 |