Wide temperature -400F to +500F (-240 Cto + 260C) pressure sensor, 5000 psi,
1 pC/psi, 0.218" dia. SS diaphragm, accel. comp., 5-point cal ranges at 5kpsi, 500psi and 100psi.
|
|
ENG |
SI |
|
Performance |
||
|
Sensitivity (±15 %) |
1.1 pC/psi |
0.16 pC/kPa |
|
Measurement Range |
5000 psi |
34475 kPa |
|
Maximum Pressure (total) |
10000 psi |
68950 kPa |
|
Resonant Frequency |
≥200 kHz |
≥200 kHz |
|
Rise Time (reflected) |
≤2.0 µ sec |
≤2.0 µ sec |
|
Non-Linearity [1] |
≤1.0 % FS |
≤1.0 % FS |
|
Environmental |
||
|
Maximum Shock |
10000 g pk |
98000 m/s² pk |
|
Acceleration Sensitivity [2] |
0.003 psi/g |
|
|
Temperature Range (Operating) |
-400 to +500 °F |
-240 to +260 °C |
|
Maximum Flash Temperature |
3000 °F |
1649 °C |
|
Maximum Vibration |
5000 g pk |
49000 m/s² pk |
|
Electrical |
||
|
Output Polarity (Positive Pressure) |
Negative |
Negative |
|
Capacitance [2] |
24 pF |
24 pF |
|
Insulation Resistance (500°F/260°C) |
≥1000000000 Ohm |
≥1000000000 Ohm |
|
Insulation Resistance (at room temp) |
≥1000000000000 Ohm |
≥1000000000000 Ohm |
|
Physical |
||
|
Sensing Element |
Quartz |
Quartz |
|
Sensing Geometry |
Compression |
Compression |
|
Housing Material |
17-4 Stainless Steel |
17-4 Stainless Steel |
|
Diaphragm |
Stainless Steel 316L |
Stainless Steel 316L |
|
Sealing |
Welded Hermetic |
Welded Hermetic |
|
Electrical Connector |
10-32 Coaxial Jack |
10-32 Coaxial Jack |
|
Weight (with clamp nut) |
|
6 gm |
* All specifications are at room temperature unless otherwise specified.

Specification Notes
[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] See PCB Declaration of Conformance 158 for details.
Accessories
|
Supplied |
||
|
PCS-10 |
Single point sensitivity coefficient at sensor maximum operating temperature |
0
|
|
PCS-1BA |
|
0 |
|
060A03 |
Clamp nut, 5/16-24-2A thd, 1/4" hex, SS (for Series 111, 112 & 113) |
1 |
|
060A05 |
Clamp nut, M7 x 0.75-6G thd (for Series M111, M112 & M113) |
1 |
|
065A05 |
Seal sleeve, sensor recess mount, 0.248" OD x 0.221" ID x 0.240" thk, 17-4 SS (for Series 111A, 112A & 113A) |
1 |
|
065A29 |
Seal, 0.250" OD x 0.218" ID x 0.015" thk, stainless steel (minimum order 5 each) |
2 |
|
065A02 |
Seal ring, sensor flush mount, 0.248" OD x 0.219" ID x 0.015" thk, brass (for Series 111A, 112A & 113A) |
3 |
Optional Versions
(P) Positive Output Polarity
|
|
English |
SI |
|
Output Polarity |
Positive |
|
(W) Water Resistant Cable
|
Accessories: |
|||
|
Supplied |
060A03 |
Clamp nut, 5/16-24-2A thd, 1/4" hex, stainless steel |
1 |
(WM) Water Resistant Cable
|
Accessories: |
|||
|
Supplied |
060A05 |
Clamp nut M7 x 0.75-6g thd |
1 |