HIGH FREQUENCY CHARGE PRESSURE SENSOR Model 113B03

High frequency charge pressure sensor, 15000 psi, 0.39 pC/psi, 0.218" dia. diaphragm, accel. comp.

Measurement Range: 15000 psi (103420 kPa)
Sensing Element: Quartz
Temperature Range: -100 to +400 °F (-73 to +204 °C)
Electrical Connector: 10-32 Coaxial Jack
Weight: 0.20 oz (6.0 gm)

	ENG	SI
Performance
Sensitivity (±15 %)	0.39 pC/psi	0.056 pC/kPa
Measurement Range [2]	15000 psi	103425 kPa
Maximum Pressure (Total) [2]	15000 psi	103425 kPa
Resonant Frequency	≥500 kHz	≥500 kHz
Rise Time	≤1.0 µ sec	≤1.0 µ sec
Non-Linearity [1]	≤1.0 % FS	≤1.0 % FS
Environmental
Maximum Shock	20000 g pk	196000 m/s² pk
Acceleration Sensitivity [2]	0.002 psi/g	0.0014 kPa/(m/s²)
Temperature Range (Operating)	-100 to +275 °F	-73 to +135 °C
Temperature Coefficient of Sensitivity	≤0.03 %/°F	≤0.054 %/°C
Maximum Vibration	2000 g pk	19600 m/s² pk
Electrical
Output Polarity (Positive Pressure)	Negative	Negative
Capacitance	12 pF	12 pF
Insulation Resistance (at room temp)	≥1000000000000 Ohm	≥1000000000000 Ohm
Insulation Resistance (400)	≥1000000000 Ohm	≥1000000000 Ohm
Physical
Sensing Geometry	Compression	Compression
Sensing Element	Quartz	Quartz
Housing Material	17-4 Stainless Steel	17-4 Stainless Steel
Diaphragm	Invar	Invar
Sealing	Welded Hermetic	Welded Hermetic
Electrical Connector	10-32 Coaxial Jack	10-32 Coaxial Jack
Weight (with clamp nut)	20 oz	6.0 gm

* All specifications are at room temperature unless otherwise specified.

Specification Notes

[1] Zero-based, least-squares, straight line method.

[2] Для датчика, встановленого в різьбовий адаптер, див. креслення встановлення адаптера, щоб дізнатися про аксесуари, що постачаються, та обмеження тиску.

[3] Typical.

[4] See PCB Declaration of Conformance PS158 for details.

Accessories

Supplied
PCS-1BC		0
060A03	Clamp nut, 5/16-24-2A thd, 1/4" hex, SS (for Series 111, 112 & 113)	1
060A05	Clamp nut, M7 x 0.75-6G thd (for Series M111, M112 & M113)	1
065A05	Seal sleeve, sensor recess mount, 0.248" OD x 0.221" ID x 0.240" thk, 17-4 SS (for Series 111A, 112A & 113A)	1
065A02	Seal ring, sensor flush mount, 0.248" OD x 0.219" ID x 0.015" thk, brass (for Series 111A, 112A & 113A)	3

Optional Versions

(E) Emralon coating

Accessories:
Supplied	065A08	Isolation ring 0.250"OD x 0.218" ID x 0.027" thk anodized aluminum	3
Supplied	065A08	Isolation ring 0.250"OD x 0.218" ID x 0.027" thk anodized aluminum	3
Supplied	065A22	Isolation Seal, .250" OD x .218" ID x .015", Torlon or Vespel	3
Supplied	065A22	Isolation Seal, .250" OD x .218" ID x .015", Torlon or Vespel	3

(S) Stainless Steel Diaphragm

	ENG	SI
Diaphragm	316L Stainless Steel