ICP® ballistic pressure sensor Model 109D12

High pressure ICP^® ballistic pressure sensor, 100k psi, 0.07 mV/psi, accel. comp.

	ENG	SI
Performance
Measurement Range (for ±7 V output)	100000 psi	690000 kPa
Sensitivity (±15 %)	0.07 mV/psi	01 mV/kPa
Maximum Pressure (total)	125000 psi	862000 kPa
Resolution [2]	2.0 psi	13.8 kPa
Resonant Frequency	≥400 kHz	≥400 kHz
Rise Time	≤2.0 µ sec	≤2.0 µ sec
Non-Linearity [1]	≤2.0 % FS	≤2.0 % FS
Environmental
Acceleration Sensitivity [2]	0.02 psi/g	014 kPa/(m/s²)
Temperature Range (Operating)	-100 to +275 °F	-73 to +135 °C
Temperature Coefficient of Sensitivity	≤0.07 %/°F	≤0.126 %/°C
Maximum Flash Temperature	3000 °F	1649 °C
Maximum Vibration	2000 g pk	19600 m/s² pk
Maximum Shock	50000 g pk	490000 m/s² pk
Electrical
Output Polarity (Positive Pressure)	Positive	Positive
Discharge Time Constant (at room temp)	>1000 sec	>1000 sec
Excitation Voltage	20 to 30 VDC	20 to 30 VDC
Constant Current Excitation	2 to 20 mA	2 to 20 mA
Output Impedance	≤100 Ohm	≤100 Ohm
Output Bias Voltage	8 to 14 VDC	8 to 14 VDC
Physical
Sensing Element	Quartz	Quartz
Sensing Geometry	Compression	Compression
Housing Material	C-300	C-300
Diaphragm	C-300	C-300
Sealing	Epoxy	Epoxy
Electrical Connector	10-32 Coaxial Jack	10-32 Coaxial Jack
Weight (with clamp nut)	0.6 oz	17 gm

* All specifications are at room temperature unless otherwise specified.

Specification Notes

[1] Zero-based, least-squares, straight line method.

[2] Typical.

[3] See PCB Declaration of Conformance 023 for details.

Accessories

Supplied
PCS-2	Calibration of pressure sensors up to 100k psi (includes Series 117B in oil, excludes model 113B50)	0
065A06	Seal ring, 0.318" OD x 0.250" ID x 0.010" thick, 316L SS (for Series 108, 109, 118 and 119)	3

Optional Versions

(Н) Hermetic Seal