ICP® MICROPHONE, ACUOSTIC PRESSURE SENSOR Model 106B52
ICP® microphone, 5000 mV/psi, resolution 0.00002 psi (+77 dB) accel. comp.
- Measurement Range: 1 psi (6,98 kPa)
- Sensitivity: (±15%) 5000 mV/psi (725 mV/kPa)
- Low Frequency Response: (-5%) 2.5 Hz
- Resonant Frequency: >=40 kHz (>=40 kHz)
- Electrical Connector: 10-32 Coaxial Jack
- Weight: 1.2 oz (35.0 gm)
|
|
ENG |
SI |
|
Performance |
||
|
Measurement Range (for ±5V output) |
1.0 psi |
6,89 кПа |
|
Useful Overrange (for ±5V output) [3] |
2.0 psi |
13,8 кПа |
|
Sensitivity (±15%) |
5000 mV/psi |
725 mV/kPa |
|
Maximum Pressure (step) |
10 psi |
68,9 kPa |
|
Maximum Pressure (total) |
50 psi |
345 kPa |
|
Resolution [2] |
|
0.00013 kPa |
|
Resonant Frequency |
≥40 kHz |
≥40 kHz |
|
Rise Time |
≤12.5 µ sec |
≤12.5 µ sec |
|
Low Frequency Response (-5 %) |
2.5 Hz |
2.5 Hz |
|
Non-Linearity [1] |
≤1.0 % FS |
≤1.0 % FS |
|
Environmental |
||
|
Acceleration Sensitivity [2] |
0.002 psi/g |
0.0014 kPa/(m/s2) |
|
Temperature Range (Operating) |
-100 to +250 °F |
-73 to +121 °C |
|
Temperature Coefficient of Sensitivity |
≤0.03 %/°F |
≤0.054 %/°C |
|
Maximum Flash Temperature |
3000 °F |
1650 °C |
|
Maximum Vibration |
500 g pk |
4900 m/s² pk |
|
Maximum Shock |
1000 g pk |
9800 m/s² pk |
|
Electrical |
||
|
Output Polarity (Positive Pressure) |
Positive |
Positive |
|
Discharge Time Constant (at room temp) |
≥0.2 sec |
≥0.2 sec |
|
Excitation Voltage |
24 to 27 VDC |
24 to 27 VDC |
|
Constant Current Excitation |
2 to 20 mA |
2 to 20 mA |
|
Output Impedance |
≤100 Ohm |
≤100 Ohm |
|
Output Bias Voltage |
7 to 14 VDC |
7 to 14 VDC |
|
Physical |
||
|
Sensing Element |
Quartz |
Quartz |
|
Housing Material |
17-4 Stainless Steel |
17-4 Stainless Steel |
|
Diaphragm |
316L Stainless Steel |
316L Stainless Steel |
|
Sealing |
Welded Hermetic |
Welded Hermetic |
|
Electrical Connector |
10-32 Coaxial Jack |
10-32 Coaxial Jack |
|
Weight |
1.2 oz |
35.0 gm |
* All specifications are at room temperature unless otherwise specified.
Specification Notes
[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] See PCB Declaration of Conformance PS023 for details.
Accessories
|
Supplied |
||
|
PCS-1 |
Calibration of dynamic pressure sensors at 20% intervals to full scale, max 15 kpsi range. |
0 |
|
PCS-24 |
|
0 |
|
060A11 |
Acetal clamp nut, 3/4-16-2A thd, 3/4" hex (for Model 106B50) |
1 |
|
060A13 |
Metric Acetal clamp nut, M20 x 1.5-6G thd, 20 mm hex (for Model M106B50) |
1 |
|
065A36 |
Seal, 0.687" OD x 0.625" ID x 0.060" thk, Acetal (for Model 106B5X) |
3 |
Optional Versions
(E) Emralon coating
|
|
ENGLISH |
SI |
|
Electrical Isolation |
100000000 Ohm |
|
|
Coating |
Emralon |
|
(W) Water Resistant Cable
|
Accessories: |
|||
|
Supplied |
060A11 |
Acetal clamp nut 3/4-16-2A thd 3/4" hex |
1 |
(WM) Water Resistant Cable
|
Accessories: |
|||
|
Supplied |
060A13 |
Metric Acetal clamp nut M20 x 1.5-6g thd 20 mm hex |
1 |