Shot shell ballistic pressure sensor Model 118A07

Accepted by SAAMI, Ballistic shot shell pressure sensor, 15k psi, 0.28 pC/psi, 3/8-24 integral mtg.

	ENG	SI
Performance
Measurement Range	15000 psi	103400 kPa
Sensitivity (±15 %)	0.28 pC/psi	041 pC/kPa
Maximum Pressure (total) [2]	35000 psi	241000 kPa
Resonant Frequency	≥175 kHz	≥175 kHz
Rise Time (Reflected)	≤2.5 µ sec	≤2.5 µ sec
Non-Linearity [1]	≤0.5 % FS	≤0.5 % FS
Environmental
Maximum Shock	20000 g pk	196000 m/s² pk
Acceleration Sensitivity [3]	0.03 psi/g	021 kPa/(m/s²)
Temperature Range (Operating)	-50 to +325 °F	-46 to +163 °C
Temperature Coefficient of Sensitivity	≤0.06 %/°F	≤0.108 %/°C
Maximum Flash Temperature	3000 °F	1649 °C
Maximum Vibration	2000 g pk	19600 m/s² pk
Electrical
Output Polarity (Positive Pressure)	Negative	Negative
Capacitance	5 pF	5 pF
Insulation Resistance (at room temp)	≥1000000000000 Ohm	≥1000000000000 Ohm
Physical
Sensing Element	Quartz	Quartz
Sensing Geometry	Compression	Compression
Housing Material	Stainless Steel	Stainless Steel
Diaphragm	Stainless Steel	Stainless Steel
Sealing	Epoxy	Epoxy
Electrical Connector	10-32 Coaxial Jack	10-32 Coaxial Jack
Weight (with clamp nut)	0.52 oz	14.6 gm

* All specifications are at room temperature unless otherwise specified.

Specification Notes

[1] Zero-based, least-squares, straight line method.

[2] Non-Linearity for maximum pressure will be ≤ 2.0%

[3] Typical.

[4] See PCB Declaration of Conformance 158 for details.

Accessories

Supplied
PCS-1BD		0
065A19	Spacer set, 0.250" ID (for conformal Models 117B01-117B65 & 117B101-117B999)	1
065A19	Seal ring, 0.318" OD x 0.250" ID x 0.010" thick, 316L SS (for Series 108, 109, 118 and 119)	3