Subminiature ICP® pressure sensor, 1000 psi, 5 mV/psi, 0.099" dia. diaphragm, 10-32 mtg thd.
|
|
ENG |
SI |
|
Performance |
||
|
Measurement Range (for ±5V output) |
1000 psi |
6895 kPa |
|
Sensitivity (±15 %) |
5 mV/psi |
0.73 mV/kPa |
|
Maximum Pressure [3] |
7500 psi |
51700 kPa |
|
Resolution [2] |
0.02 psi |
|
|
Resonant Frequency |
≥250 kHz |
≥250 kHz |
|
Rise Time |
≤2.0 µ sec |
≤2.0 µ sec |
|
Low Frequency Response (-5 %) |
|
|
|
Non-Linearity [1] |
≤2.0 % FS |
≤2.0 % FS |
|
Environmental |
||
|
Acceleration Sensitivity [2] |
0.04 psi/g |
0.028 kPa/(m/s2) |
|
Temperature Range (Operating) |
-100 to +250 °F |
-73 to +121 °C |
|
Temperature Coefficient of Sensitivity |
≤0.09 %/°F |
≤0.162 %/°C |
|
Maximum Flash Temperature |
3000 °F |
1649 °C |
|
Maximum Vibration |
1000 g pk |
9800 m/s² pk |
|
Maximum Shock |
5000 g pk |
49000 m/s² pk |
|
Electrical |
||
|
Output Polarity (Positive Pressure) |
Positive |
Positive |
|
Discharge Time Constant (at room temp) |
≥1.0 sec |
≥1.0 sec |
|
Excitation Voltage |
22 to 30 VDC |
22 to 30 VDC |
|
Constant Current Excitation |
2 to 20 mA |
2 to 20 mA |
|
Output Impedance |
<100 Ohm |
<100 Ohm |
|
Output Bias Voltage |
8 to 14 VDC |
8 to 14 VDC |
|
Physical |
||
|
Sensing Geometry |
Compression |
Compression |
|
Sensing Element |
Quartz |
Quartz |
|
Housing Material |
Stainless Steel |
Stainless Steel |
|
Diaphragm |
17-4 Stainless Steel |
17-4 Stainless Steel |
|
Sealing |
Welded Hermetic |
Welded Hermetic |
|
Electrical Connector |
5-44 Coaxial |
5-44 Coaxial |
|
Weight (with clamp nut) |
0.055 oz |
1.56 gm |
* All specifications are at room temperature unless otherwise specified.
Specification Notes
[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] See PCB Declaration of Conformance PS023 for details.
Accessories
|
Supplied |
||
|
PCS-1 |
|
0 |
|
018C10 |
Miniature, lightweight, black coaxial cable, vinyl insulation jacket, 10-ft, 5-44 plug to BNC plug |
1 |
|
040A37 |
Hex nut driver, 5/32" (for series 105C) |
1 |
|
065A10 |
Seal ring, 0.138" OD x 0.101" ID x 0.022" thk, brass (for Model 105C) |
3 |
|
065A38 |
Seal sleeve, 0.138" OD x 0.101" ID x 0.105" thk, brass (for Model 105A) |
3 |