Triaxial ICP® Accelerometer Model 356A05

Platinum Stock Products; Triaxial, lightweight miniature, ceramic shear ICP® accel., 0.25 mV/g, 0.25" cube, 5 ft. integral cable to 4-pin jack +325F (163C) operating temp, non-filtered.

Sensitivity: (±20%) 0.25 mV/g (0.025 mV/(m/s²))
Measurement Range: ±20000 g pk (±196200 m/s² pk)
Frequency Range: (+/-10%) 1 to 10000 Hz
Electrical Connector: Integral Cable

	ENG	SI
Performance
Sensitivity (±20 %)	0.25 mV/g	0.025 mV/(m/s²)
Measurement Range	±20000 g pk	±196200 m/s² pk
Frequency Range (±5 %)	1.2 to 6000 Hz	2 to 8000 Hz
Frequency Range (±10 %)	1 to 10000 Hz	2 to 5000 Hz
Resonant Frequency	≥50 kHz	≥50 kHz
Broadband Resolution (1) [2]	0.04 g rms	0.39 m/s² rms
Non-Linearity (10000 g, 98100 m/s²) [1]	≤1 %	≤1 %
Non-Linearity (20000 g, 196200 m/s²) [1]	≤3 %	≤3 %
Transverse Sensitivity	≤5 %	≤5 %
Environmental
Overload Limit (Shock)	±30000 g pk	±294300 m/s² pk
Temperature Range (Operating)	-65 to +325 °F	-54 to +163 °C
Temperature Response [2]	See Graph %/°F	See Graph %/°F
Base Strain Sensitivity [2]	0.05 g/µε	0.5 (m/s²)/µε
Electrical
Excitation Voltage	20 to 30 VDC	20 to 30 VDC
Constant Current Excitation	2 to 20 mA	2 to 20 mA
Output Impedance	≤100 Ohm	≤100 Ohm
Output Bias Voltage	8 to 14 VDC	8 to 14 VDC
Discharge Time Constant	4 to 1.2 sec 4 to 1.2 sec
Settling Time (within 10% of bias)	<3 sec	<3 sec
Spectral Noise (1 Hz) [2]	13.5 µg/√Hz	132 (µm/sec²)/√Hz
Spectral Noise (10 Hz) [2]	3.8 µg/√Hz	37.3 (µm/sec²)/√Hz
Spectral Noise (100 Hz) [2]	1.21 µg/√Hz	11.7 (µm/sec²)/√Hz
Spectral Noise (1 kHz) [2]	0.36 µg/√Hz	3.53 (µm/sec²)/√Hz
Spectral Noise (10 kHz) [2]	0.13 µg/√Hz	1.28 (µm/sec²)/√Hz
Physical
Sensing Element	Ceramic	Ceramic
Sensing Geometry	Shear	Shear
Housing Material	Titanium	Titanium
Sealing	Hermetic	Hermetic
Size - Height	25 in	6.35 mm
Size - Length	25 in	6.35 mm
Size - Width	25 in	6.35 mm
Weight (without cable) [2]	03 oz	0.8 gm
Electrical Connector	Integral Cable	Integral Cable
Electrical Connection Position	Side	Side
Cable Termination	1/4-28 4-Pin Jack	1/4-28 4-Pin Jack
Cable Length	5 ft	1.5 m
Cable Type	019 4-cond Shielded	019 4-cond Shielded
Mounting	Adhesive	Adhesive

* All specifications are at room temperature unless otherwise specified.

Specification Notes

[1] Zero-based, least-squares, straight line method.

[2] Typical.

[3] See PCB Declaration of Conformance PS023 for details.

Accessories

Supplied
034G05	4-conductor, low noise, shielded FEP cable, 5-ft, 4-socket plug to (3) BNC plugs (labeled X Y Z)	1
080A109	Petro Wax, one square, 1" x 1" x 0.25"	1
080A90	Quick bond Gel (for use with accel adhesive mtg bases to fill gaps on rough surfaces)
ACS-159T		1