Triaxial ICP® Accelerometer Model 356A19

Triaxial, miniature (4 gm), ceramic shear ICP® accel 10 mV/g, 1 to 13k Hz (± 5%), TEDS 1.0, 5 ft attached cable, low outgassing excl. extension cable.

Sensitivity: (±10%) 10 mV/g (1.02 mV/(m/s²))
Measurement Range: ±500 g pk (±4905 m/s² pk)

	ENG	SI
Performance
Sensitivity (±10 %)	10.0 mV/g	1.01 mV/(m/s²)
Measurement Range	±500 g pk	±4905 m/s² pk
Frequency Range (±5 %	1 to 13000 Hz	1 to 13000 Hz
Frequency Range (±10 %)	0,61 to 5000 Hz	0,61 to 5000 Hz
Resonant Frequency	≥55 kHz	≥55 kHz
Broadband Resolution (1) [2]	0.006 g rms	0.06 m/s² rms
Non-Linearity [1]	≤1 %	≤1 %
Transverse Sensitivity	≤5 %	≤5 %
TEDS Compliant (Per IEEE 1451.4) [3]	yes	yes
Environmental
Overload Limit (Shock)	±10000 g pk	±98100 m/s² pk
Temperature Range (Operating)	-65 to +250 °F	-54 to +121 °C
Temperature Response [2]	See Graph %/°F	See Graph %/°F
Electrical
Excitation Voltage	18 to 30 VDC	18 to 30 VDC
Constant Current Excitation	2 to 20 mA	2 to 20 mA
Output Impedance	≤200 Ohm	≤200 Ohm
Output Bias Voltage	8 to 13 VDC	8 to 13 VDC
Discharge Time Constant	6 to 1.6 sec 6 to 1.6 sec
Settling Time (within 10% of bias)	<5 sec	<5 sec
Spectral Noise (1 Hz) [2]	500 µg/√Hz	4905 (µm/sec²)/√Hz
Spectral Noise (10 Hz) [2]	160 µg/√Hz	1570 (µm/sec²)/√Hz
Spectral Noise (100 Hz) [2]	75 µg/√Hz	736 (µm/sec²)/√Hz
Spectral Noise (1 kHz) [2]	65 µg/√Hz	638 (µm/sec²)/√Hz
Physical
Sensing Element	Ceramic	Ceramic
Sensing Geometry	Shear	Shear
Housing Material	Titanium	Titanium
Sealing	Hermetic	Hermetic
Size - Height	4 in	10.2 mm
Size - Length	4 in	10.2 mm
Size - Width	4 in	10.2 mm
Weight (without cable) [2]	14 oz	4.0 gm
Electrical Connector	1/4-28 4-Pin Jack	1/4-28 4-Pin Jack
Electrical Connection Position	Side	Side
Cable Length	5 ft	1.5 m
Cable Type	034 4-cond Shielded	034 4-cond Shielded
Mounting Thread	5-40 Female	5-40 Female
Mounting Torque	4 to 5 in-lb	45 to 56 N-cm

* All specifications are at room temperature unless otherwise specified.

Specification Notes

[1] Zero-based, least-squares, straight line method.

[2] Typical.

[3] TEDS Capable Digital Memory and Communication, compliant with IEEE 1451.4

[4] See PCB Declaration of Conformance PS023 for details.

Accessories

Supplied
034G05	4-conductor, low noise, shielded FEP cable, 5-ft, 4-socket plug to (3) BNC plugs (labeled X Y Z)	1
080A109	Petro Wax, one square, 1" x 1" x 0.25"	1
080A15	Adhesive mtg base, 0.312" hex x 0.125" thk, 5-40 tapped hole, aluminum w/isolation hardcoat finish	1
081A27	Mounting stud, 5-40 to 5-40 thds, w/o shoulder, BeCu	1
ACS-1T	Triaxial amplitude response calibration, from 10 Hz to upper 5% frequency, NIST traceable	1
M081A27	Metric mtg stud, 5-40 to M3 x 0.50 long	1