Triaxial ICP® Accelerometer Model HT356B01
Platinum Stock Products; Triaxial ICP® accel., 5 mV/g, to +356 F (+180 C),
cable included.
- Sensitivity: (±20%) 5 mV/g (0.51 mV/(m/s²))
- Measurement Range: ±1000 g pk (±9810 m/s² pk)
- Electrical Connector: Integral Cable
|
|
ENG |
SI |
|
Performance |
|
|
|
Sensitivity (±20 %) |
5.0 mV/g |
0.51 mV/(m/s²) |
|
Measurement Range |
±1000 g pk |
±9810 m/s² pk |
|
Frequency Range (±5 %) (y or z axis) |
2 to 8000 Hz |
2 to 8000 Hz |
|
Frequency Range (±5 %) (x axis) |
2 to 5000 Hz |
2 to 5000 Hz |
|
Frequency Range (+1 dB) (x axis) |
≥8 kHz |
≥8 kHz |
|
Resonant Frequency |
≥50 kHz |
≥50 kHz |
|
Broadband Resolution (1) [2] |
0.003 g rms |
0.03 m/s² rms |
|
Non-Linearity [1] |
≤1 % |
≤1 % |
|
Transverse Sensitivity |
≤5 % |
≤5 % |
|
Environmental |
|
|
|
Overload Limit (Shock) |
±10000 g pk |
±98100 m/s² pk |
|
Temperature Range (Operating) [3] |
-65 to +356 °F |
-54 to +180 °C |
|
Temperature Response [2] |
See Graph %/°F |
See Graph %/°F |
|
Electrical |
|
|
|
Excitation Voltage |
18 to 30 VDC |
18 to 30 VDC |
|
Constant Current Excitation |
2 to 4 mA |
2 to 4 mA |
|
Output Impedance |
≤200 Ohm |
≤200 Ohm |
|
Output Bias Voltage |
7 to 12 VDC |
7 to 12 VDC |
|
Discharge Time Constant |
|
|
|
Settling Time (within 10% of bias) |
<3 sec |
<3 sec |
|
Spectral Noise (1 Hz) [2] |
1200 µg/√Hz |
11772 (µm/sec2)/√Hz |
|
Spectral Noise (10 Hz) [2] |
300 µg/√Hz |
2943 (µm/sec2)/√Hz |
|
Spectral Noise (100 Hz) [2] |
100 µg/√Hz |
981 (µm/sec2)/√Hz |
|
Spectral Noise (1 kHz) [2] |
30 µg/√Hz |
294 (µm/sec2)/√Hz |
|
Physical |
|
|
|
Sensing Element |
Ceramic |
Ceramic |
|
Sensing Geometry |
Shear |
Shear |
|
Housing Material |
Titanium |
Titanium |
|
Sealing |
Hermetic |
Hermetic |
|
Size - Height |
|
6.35 mm |
|
Size - Length |
|
6.35 mm |
|
Size - Width |
|
6.35 mm |
|
Weight [2] |
0.04 oz |
1.0 gm |
|
Electrical Connector |
Integral Cable |
Integral Cable |
|
Electrical Connection Position |
Side |
Side |
|
Cable Termination [3] |
1/4-28 4-Pin Jack |
1/4-28 4-Pin Jack |
|
Cable Length |
5 ft |
1.5 m |
|
Cable Type |
034 4-cond Shielded |
034 4-cond Shielded |
|
Mounting |
Adhesive |
Adhesive |
* All specifications are at room temperature unless otherwise specified.
Specification Notes
[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Terminating connector limited to 325F (163C).
[4] Increased current up to 20mA acceptable to 250F (121C).
[5] See PCB Declaration of Conformance PS023 for details.
Accessories
|
Supplied |
||
|
034G05 |
4-conductor, low noise, shielded FEP cable, 5-ft, 4-socket plug to (3) BNC plugs (labeled X Y Z) |
1 |
|
080A109 |
Petro Wax, one square, 1" x 1" x 0.25" |
1 |
|
080A90 |
Quick bond Gel (for use with accel adhesive mtg bases to fill gaps on rough surfaces) |
1 |
|
ACS-1T |
Triaxial amplitude response calibration, from 10 Hz to upper 5% frequency, NIST traceable |
1 |
Optional Versions
(J) Ground Isolated
|
|
ENG |
SI |
|
Size - Height |
|
7.10 mm |
|
Size - Length |
|
7.10 mm |
|
Size - Width |
|
7.10 mm |
|
Weight |
0.04 oz |
1.2 gm |
|
Electrical Isolation |
>100000000 Ohm |
|
(W) Water Resistant Cable