Triaxial ICP® Accelerometer Model TLD356A03

Triaxial, lightweight (1.0 gm) miniature, ceramic shear ICP® accel., 10 mV/g, 0.25" cube, TEDS 1.0.

Sensitivity: (±20%) 10 mV/g (1.02 mV/(m/s²))
Measurement Range: ±500 g pk (±4905 m/s² pk)
Electrical Connector: Integral Cable

	ENG	SI
Performance
Sensitivity (±20 %)	10.0 mV/g	1.01 mV/(m/s²)
Measurement Range	±500 g pk	±4905 m/s² pk
Frequency Range (±5 %) (y or z axis)	2 to 8000 Hz	2 to 8000 Hz
Frequency Range (±5 %) (x axis)	2 to 5000 Hz	2 to 5000 Hz
Frequency Range (+1 dB) (x axis)	≥8 kHz	≥8 kHz
Resonant Frequency	≥50 kHz	≥50 kHz
Broadband Resolution (1) [2]	0.003 g rms	0.03 m/s² rms
Non-Linearity [1]	≤1 %	≤1 %
Transverse Sensitivity	≤5 %	≤5 %
Environmental
Overload Limit (Shock)	±5000 g pk	±49050 m/s² pk
Temperature Range (Operating)	-65 to +250 °F	-54 to +121 °C
Temperature Response [2]	See Graph %/°F	See Graph %/°F
Electrical
Excitation Voltage	22 to 30 VDC	22 to 30 VDC
Constant Current Excitation	2 to 20 mA	2 to 20 mA
Output Impedance	≤200 Ohm	≤200 Ohm
Output Bias Voltage	9 to 16 VDC	9 to 16 VDC
Discharge Time Constant	24 to 1.0 sec 24 to 1.0 sec
Settling Time (within 10% of bias)	<3 sec	<3 sec
Spectral Noise (1 Hz) [2]	1200 µg/√Hz	11772 (µm/sec²)/√Hz
Spectral Noise (10 Hz) [2]	300 µg/√Hz	2943 (µm/sec²)/√Hz
Spectral Noise (100 Hz) [2]	100 µg/√Hz	981 (µm/sec²)/√Hz
Spectral Noise (1 kHz) [2]	30 µg/√Hz	294 (µm/sec²)/√Hz
Physical
Sensing Element	Ceramic	Ceramic
Sensing Geometry	Shear	Shear
Housing Material	Titanium	Titanium
Sealing	Hermetic	Hermetic
Size - Height	25 in	6.35 mm
Size - Length	25 in	6.35 mm
Size - Width	25 in	6.35 mm
Weight (without cable) [2]	04 oz	1.0 gm
Electrical Connector	Integral Cable	Integral Cable
Electrical Connection Position	Side	Side
Cable Length	5 ft	1.5 m
Cable Type	034 4-cond Shielded	034 4-cond Shielded
Mounting	Adhesive	Adhesive

* All specifications are at room temperature unless otherwise specified.

Specification Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] See PCB Declaration of Conformance PS023 for details.

Accessories

Supplied
034G05	4-conductor, low noise, shielded FEP cable, 5-ft, 4-socket plug to (3) BNC plugs (labeled X Y Z)	1
080A109	Petro Wax, one square, 1" x 1" x 0.25"	1
080A90	Quick bond Gel (for use with accel adhesive mtg bases to fill gaps on rough surfaces)
ACS-1T	Triaxial amplitude response calibration, from 10 Hz to upper 5% frequency, NIST traceable	1

Optional Versions

(J) Ground Isolated

	ENG	SI
Weight	0.04 oz	1.2 gm
Size - Height	0.28 in	7.10 mm
Size - Width	0.28 in	7.10 mm
Electrical Isolation	>100000000 Ohm
Size - Length	0.28 in	7.10 mm

(TLD) TEDS Capable of Digital Memory and Communication Compliant with IEEE 1451.4

	ENG	SI
Output Bias Voltage	9.5 to 17 VDC
Excitation Voltage	23 to 30 VDC

(W) Water Resistant Cable