Triaxial VC MEMS Accelerometer - Model 3713F11100G

Triaxial VC MEMS accelerometer, 13.5 mV/g, 100 g, single-ended, 9-pin socket.

Sensitivity: (±3%) 13.5 mV/g (1.38 mV/(m/s²))
Measurement Range: ±100 g pk (±981 m/s² pk)
Electrical Connector: 9-pin
Weight: 0.6 oz (17.3 gm)

	ENG	SI
Performance
Sensitivity (±3 %) [3]	13.5 mV/g	1.38 mV/(m/s²)
Measurement Range	±100 g pk	±981 m/s² pk
Frequency Range (±5 %)	0 to 1500 Hz	0 to 1500 Hz
Frequency Range (±10 %)	0 to 2500 Hz	0 to 2500 Hz
Resonant Frequency [2]	8.5 kHz	8.5 kHz
Phase Response (10 Hz)	<10.0 °	<10.0 °
Non-Linearity (Typical) [1]	0.3 %	0.3 %
Non-Linearity (Max) [1]	1 %	1 %
Broadband Resolution (0.5) [2]	3.0 mg rms	0.03 m/s² rms
Transverse Sensitivity (Typical)	1 %	1 %
Transverse Sensitivity (Max)	3 %	3 %
Environmental
Overload Limit (Shock)	±5000 g pk	±49050 m/s² pk
Temperature Range (Operating)	-65 to +250 °F	-54 to +121 °C
Temperature Range (Storage)	-65 to +250 °F	-54 to +121 °C
Temperature Coefficient of Sensitivity [4]	±2.5 %	±2.5 %
Temperature Coefficient of Sensitivity [2] [4]	±1 %	±1 %
Zero g Offset Temperature Coefficient [2] [4] [5]	±1 % FSO	±1 % FSO
Base Strain Sensitivity [2]	0.001 g/µε	01 (m/s²)/µε
Magnetic Sensitivity [2]	40 µg/gauss	3.9 (m/s²)/Tesla
Electrical
Excitation Voltage	5 to 28 VDC	5 to 28 VDC
Current Consumption	≤15 mA	≤15 mA
Output Impedance	≤120 Ohm	≤120 Ohm
Offset Voltage [6]	±20 mVDC	±20 mVDC
Spectral Noise (1 Hz) [2]	300 µg/√Hz	2943 (µm/sec²)/√Hz
Spectral Noise (10 Hz) [2]	300 µg/√Hz	2943 (µm/sec²)/√Hz
Spectral Noise (100 Hz) [2]	300 µg/√Hz	2943 (µm/sec²)/√Hz
Electrical Isolation (Case)	>100000000 Ohm	>100000000 Ohm
Physical
Housing Material	Titanium	Titanium
Sealing	Hermetic	Hermetic
Size - Height	8 in	20.3 mm
Size - Length	0.8 in	20.3 mm
Size - Width	8 in	20.3 mm
Weight (without cable)[2]	6 oz	17.3 gm
Electrical Connector	9-pin	9-pin
Electrical Connection Position	Side	Side
Mounting	10-32 Female	10-32 Female

* All specifications are at room temperature unless otherwise specified.

Specification Notes

[1] Zero-based, least-squares, straight line method.

[2] Typical.

[3] Measured at 100 Hz, 10.0 grms.

[4] -65 to +250 °F, ref. 75 °F (-54 to +121 °C, ref. 24 °C)

[5] FSO= Full Scale Output over the Measurement Range

[6] Offset tolerance is based on 10 ft of 037 test cable.

[7] See PCB Declaration of Conformance PS027 for details.

Accessories

Supplied
080A12	Adhesive mtg base, 0.75" hex x 0.2" thk, 10-32 tapped hole, aluminum w/insolation hardcoat finish	1
081B05	Mounting stud, 10-32 to 10-32, 0.275" long, BeCu w/shoulder	1
M081B05	Mounting stud, 10-32 to M6x0.75-6g, 0.275" long, BeCu	1