Triaxial VC MEMS Accelerometer - Model 3743G1110G

Triaxial VC MEMS accelerometer, differential, 270 mV/g, 10 g, screw mount, integral M8 connector.

Sensitivity: (±3%) 270 mV/g (27.5 mV/(m/s²))
Measurement Range: ±10 g pk (±98.1 m/s² pk)
Electrical Connector: 8-pin
Weight: 0.92 oz (26.0 gm)

	ENG	SI
Performance
Sensitivity (±3 %) [3]	270 mV/g	27.5 mV/(m/s²)
Measurement Range	±10 g pk	±98.1 m/s² pk
Frequency Range (±5 %)	0 to 1000 Hz	0 to 1000 Hz
Frequency Range (±10 %)	0 to 1500 Hz	0 to 1500 Hz
Resonant Frequency [2]	3.2 kHz	3.2 kHz
Phase Response (10 Hz)	<10.0 °	<10.0 °
Non-Linearity (Typical) [1]	0.3 %	0.3 %
Non-Linearity (Max) [1]	1 %	1 %
Broadband Resolution (0.5) [2]	0.3 mg rms	0.003 m/s² rms
Transverse Sensitivity (Typical)	1 %	1 %
Transverse Sensitivity (Max)	3 %	3 %
Environmental
Overload Limit (Shock)	±5000 g pk	±49050 m/s² pk
Temperature Range (Operating)	-65 to +250 °F	-54 to +121 °C
Temperature Range (Storage)	-65 to +250 °F	-54 to +121 °C
Temperature Coefficient of Sensitivity [4]	±2.5 %	±2.5 %
Temperature Coefficient of Sensitivity [2] [4]	±1 %	±1 %
Zero g Offset Temperature Coefficient [2] [4] [5]	±1 % FSO	±1 % FSO
Base Strain Sensitivity [2]	0.001 g/µε	01 (m/s²)/µε
Magnetic Sensitivity [2]	40 µg/gauss	3.9 (m/s²)/Tesla
Electrical
Excitation Voltage	5 to 32 VDC	5 to 32 VDC
Current Consumption	≤15 mA	≤15 mA
Output Impedance	≤120 Ohm	≤120 Ohm
Offset Voltage [6]	±20 mVDC	±20 mVDC
Common Mode Voltage (+/-0.1 VDC)	1.65 VDC	1.65 VDC
Spectral Noise (1 Hz) [2]	30 µg/√Hz	294 (µm/sec²)/√Hz
Spectral Noise (10 Hz) [2]	30 µg/√Hz	294 (µm/sec²)/√Hz
Spectral Noise (100 Hz) [2]	30 µg/√Hz	294 (µm/sec²)/√Hz
Electrical Isolation (Case)	>100000000 Ohm	>100000000 Ohm
Physical
Housing Material	Stainless Steel	Stainless Steel
Sealing	Hermetic	Hermetic
Size - Height	76 in	19.3 mm
Size - Length	1.03 in	26.2 mm
Size - Width	66 in	16.8 mm
Weight (without cable)[2]	92 oz	26.0 gm
Electrical Connector	8-pin	8-pin
Electrical Connection Position	Side	Side
Mounting	Through Hole	Through Hole

* All specifications are at room temperature unless otherwise specified.

Specification Notes

[1] Zero-based, least-squares, straight line method.

[2] Typical.

[3] Measured at 100 Hz, 1.0 grms.

[4] -65 to +250 °F, ref. 75 °F (-54 to +121 °C, ref. 24 °C)

[5] FSO= Full Scale Output over the Measurement Range

[6] Offset tolerance is based on 10 ft of 528 test cable.

[7] See PCB Declaration of Conformance PS027 for details.

Accessories

Supplied
081A135	For use with 3743G	2