Triaxial ICP® Accelerometer Model 356A17
Platinum Stock Products; Triaxial, high sensitivity, ceramic shear ICP® accel.,
500 mV/g, 0.5 to 3k Hz, aluminum hsg, 4-pin conn.
- Sensitivity: (±10%) 500 mV/g (51 mV/(m/s²))
- Measurement Range: ±10 g pk (±98 m/s² pk)
- Electrical Connector: 1/4-28 4-Pin
|
|
ENG |
SI |
|
Performance |
|
|
|
Sensitivity (±10 %) |
500.0 mV/g |
51 mV/(m/s²) |
|
Measurement Range |
±10 g pk |
±98 m/s² pk |
|
Frequency Range (±5 %) |
0.5 to 3000 Hz |
0.5 to 3000 Hz |
|
Frequency Range (±10 %) |
|
|
|
Resonant Frequency |
≥14 kHz |
≥14 kHz |
|
Broadband Resolution (1) [2] |
0.00006 g rms |
0.0006 m/s² rms |
|
Phase Response (±5 °) |
2 to 4000 Hz |
2 to 4000 Hz |
|
Non-Linearity [1] |
≤1 % |
≤1 % |
|
Transverse Sensitivity |
≤5 % |
≤5 % |
|
Environmental |
|
|
|
Overload Limit (Shock) |
±5000 g pk |
±49000 m/s² pk |
|
Temperature Range (Operating) |
-65 to +176 °F |
-54 to +80 °C |
|
Temperature Response [2] |
See Graph %/°F |
See Graph %/°F |
|
Base Strain Sensitivity [2] |
0.001 g/µε |
0.01 (m/s²)/µε |
|
Electrical |
|
|
|
Excitation Voltage |
18 to 30 VDC |
18 to 30 VDC |
|
Constant Current Excitation |
2 to 20 mA |
2 to 20 mA |
|
Output Impedance |
≤300 Ohm |
≤300 Ohm |
|
Output Bias Voltage |
8 to 12 VDC |
8 to 12 VDC |
|
Discharge Time Constant |
0.8 to 2.0 sec |
0.8 to 2.0 sec |
|
Settling Time (within 10% of bias) |
<10 sec |
<10 sec |
|
Spectral Noise (1 Hz) [2] |
18 µg/√Hz |
190 (µm/sec2)/√Hz |
|
Spectral Noise (10 Hz) [2] |
6 µg/√Hz |
60 (µm/sec2)/√Hz |
|
Spectral Noise (100 Hz) [2] |
2 µg/√Hz |
20 (µm/sec2)/√Hz |
|
Spectral Noise (1 kHz) [2] |
0.7 µg/√Hz |
7 (µm/sec2)/√Hz |
|
Spectral Noise (10 kHz) [2] |
0.2 µg/√Hz |
2 (µm/sec2)/√Hz |
|
Physical |
|
|
|
Sensing Element |
Ceramic |
Ceramic |
|
Sensing Geometry |
Shear |
Shear |
|
Housing Material |
Anodized Aluminum |
Anodized Aluminum |
|
Sealing |
Epoxy |
Epoxy |
|
Size - Height |
|
14.0 mm |
|
Size - Length |
|
20.3 mm |
|
Size - Width |
|
14.0 mm |
|
Weight [2] |
|
9.3 gm |
|
Electrical Connector |
1/4-28 4-Pin |
1/4-28 4-Pin |
|
Electrical Connection Position |
Side |
Side |
|
Mounting Thread |
5-40 Female |
5-40 Female |
* All specifications are at room temperature unless otherwise specified.
Specification Notes
[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] See PCB Declaration of Conformance PS023 for details.
Accessories
|
Supplied |
||
|
080A109 |
Petro Wax, one square, 1" x 1" x 0.25" |
1 |
|
080A145 |
Adhesive mtg base, 0.75" hex x 0.2" thk, 5-40 tapped hole, w/isolating hardcoat finish |
|
|
081A27 |
Mounting stud, 5-40 to 5-40 thds, w/o shoulder, BeCu |
1 |
|
ACS-1T |
Triaxial amplitude response calibration, from 10 Hz to upper 5% frequency, NIST traceable |
1 |
|
M081A27 |
Metric mtg stud, 5-40 to M3 x 0.50 long |
1 |
Optional Versions
(A) Adhesive Mount
|
Accessories: |
|||
|
Supplied |
080A90 |
Quick Bonding Gel |
1 |
|
Supplied |
080A109 |
Petro Wax |
1 |
(J) Ground Isolated
|
|
ENG |
SI |
|
Electrical Isolation |
>100000000 Ohm |
|
|
Size - Height |
0.60 in |
15.2 mm |
|
Size - Length |
0.80 in |
20.3 mm |
|
Size - Length |
0.63 in |
16.0 mm |
|
Weight |
0.37 oz |
10.5 gm |
|
Mounting |
Adhesive |
|
(T) TEDS Capable of Digital Memory and Communication Compliant with IEEE P1451.4
|
|
ENG |
SI |
|
Output Bias Voltage |
8.5 to 13.0 VDC |
|
(TLA) TEDS LMS International - Free Format
|
|
ENG |
SI |
|
Output Bias Voltage |
8.5 to 13.0 VDC |
|
(TLB) TEDS LMS International - Automotive Format
|
|
ENG |
SI |
|
Output Bias Voltage |
8.5 to 13.0 VDC |
|
(TLC) TEDS LMS International - Aeronautical Format
|
|
ENG |
SI |
|
Output Bias Voltage |
8.5 to 13.0 VDC |
|
(TLD) TEDS Capable of Digital Memory and Communication Compliant with IEEE 1451.4
|
|
ENG |
SI |
|
Output Bias Voltage |
8.5 to 13.0 VDC |
|